MOTION SENSOR X2 rechargeable electric screwdriver with motion sensor-Engadget Japan edition

0


(embed) https://www.youtube.com/watch?v=02QJsKoVzJ0 (/ embed)Support this project with GREEN FUNDING

MOTION SENSOR X2 is the next generation automatic driver

・ Electric screwdriver that responds to left and right hand movement with high-precision motion sensor
-One hand operation that can be replaced with a bit box with one hand!
・ Slow rotation and powerful torque are also possible! Of course you can also turn manually
・ Sturdy and luxurious metal body

↓ Please pay attention to the direction of rotation ↓

MOTION SENSOR X2 turns right when the driver is tilted to the right
Tilt to the left and tilt to the left to be a full sense driver

The conventional electric screwdriver controls the rotation with a switch, and the screw tightening speed is constant.
-When you want to retighten the screw, it does not go smoothly
・ Stress that cannot adjust speed
・ I feel unsatisfactory in power
・ Not strong enough and uneasy
・ Wrists and fingers hurt when grasping
・ The battery runs out quickly

MOTION SENSOR X2 solves these problems.

When you want to use the main body vertically, you can press the vertical operation button at the end with your thumb.
It is very easy to grip and can be used smoothly.

The reason for making MOTION SENSOR X2 is
A subsidiary of a company that makes interior parts for the car manufacturer Volvo.
Volvo ’s reputation for safety has been passed down since ancient times.

Sensory × Easy × Safety = We will deliver a new experience.

Turn your wrist to the right to turn it clockwise.
Twist to the left to automatically switch counterclockwise.
The driver's speed is automatically adjusted according to the tilt angle!
You can control changes from super slow to ultra high speed with just your wrist.

Of course, no power is required! No burden on wrists or fingers.
Since it can be used sensuously, it can be used by women who are not good at tools and elderly people.
Those who do not want to fail with screw tightening are also safe ♪
Possible to use while chargingSo you don't have to worry about the remaining battery power.

“That, it disappeared somewhere again.”
Because the bits are small and there are many types,
There are a lot of troubles such as lost or troublesome.
To replace the MOTION SENSOR X2 bit, just push it in!
Can be installed very easily with one hand.

Easy management of all 20 types of bits!
* The number of bits included with the driver is 18.
A set of 20 photos is a bit box set.

Even though it is an electric screwdriver, it takes a long time to work, and the hands are overloaded and tired.
MOTION SENSOR X2Realizes a comfortable fit that fits into the hand with reduced palm stress.
While expressing the profound feeling of the driver body, we pursued practicality that is easy to grip and less fatigued.

A bright LED light is turned on when the switch is turned on.
It is safe to work in a warehouse or in a place with little electricity.

Even if you roll a bit,You can quickly find it by lighting it with a light.
It is also recommended to prepare as an emergency light in case of power failure or disaster.

"Torque over and no further electric tightening …"
“I'd like to close the last round by hand!
At that timeYou can also use it manually.
Torque is 6kg, so screwing on a PC or a little furniture
Of course you can do without problems.

Country of origin: China

■ Driver

Driver body, 18 attached bits, USB cable, English / Chinese manual

18 included bits

■ Driver & bit box set

Driver body, bit box, USB cable, English / Chinese manual (driver), 20 attached bits, English / Chinese manual (bit box)

20 included bits

Our development team is the most professional R & D team that brings together young talents, and has excellent design and design capabilities to meet customer needs in high-precision digital products.

The high precision X2 driver is inspired by aluminum tubes. The mobile technology R & D team has been able to reach this X2 driver in 25 days, after 700 days, in order to make the addictive driver more modern and technical. It was.

All-metal “Innovative Electric Screwdriver with High-Precision Motion Sensor X2” has been completed beyond the strenuous days of design, prototype production, testing and upgrades.

Since our establishment in 2016, we have independently developed over 10 products, and in 2019 we have won 20 patents. Over the past three years, our drivers have gradually advanced into the world and have been recognized by people all over the world.

When I first got this driver and a bit box, I was thrilled and surprised!

Numerous innovative technologies with this small metal body …

A motion sensor that detects even a slight tilt, a stepless speed control that seamlessly connects it to operation, and a rugged yet luxurious design. A bit box that provides tremendous ease of use.

The technology is a big innovation for many people who use electric screwdrivers.

The first surprise is the surprising ease of use of the bit box. There must be many people who had a hard time changing the bits.

But this bit box eliminates this hard work from this world. Just press and lift, you can freely attach and remove. Surely this should become the standard in the future.

This is an innovative and wonderful thing that will benefit many people!

So I started this project.

At the Tokyo Gift Show held at Big Sight in September, several people said, “This is the best of all the exhibited products!” I would like as many people as possible to pick up and feel the excitement of a child with new tools.

Q. Please tell me the weight and size.

A. The driver body is 28mm in diameter x 183mm in length and weighs 500g. The bit box is 98.4 mm long x 121.4 mm wide x 76 mm high.

Q. How many bits are included?

A. 18 types are included with the driver, and 20 types are included with the bit box.

Q. I have never touched the tool, do you know how to use it?

A. No problem at all. It is a next-generation driver made for such people. Although it may be surprised at first because it is an innovative mechanism, it can be used freely by simply pressing the button and tilting it to the right.

Q. When using the driver upright, the buttons on the side are difficult to press.

A. A button is attached to the end to cover such a case. When you use it upright, you can use it easily by holding the button at the end with your thumb.

Q. What is the strength (torque)?

A. It has a strength of 6kg (6kgf.cm). It can be used not only for electronic equipment but also for simple DIY.

Q. Please let me know the charging performance.

A. The charging capacity is 2200mAh and the charging time is 2.5 hours at the maximum.

Q. What should I do if I can't turn it around electrically?

A. Of course, the screw may be too hard to turn. For such times, this driver has a moderate thickness, shape, and weight so that it can be easily used as a manual driver.

Q. What is a motion sensor?

A. The latest technology based on ergonomics, in which the machine moves in response to the movement of the human body. Really just tilt to the right, the bit will start spinning at a very low speed. I'm sure you will be amazed by this accuracy.

Q. Is it really easy to change bitboxes?

A. Very easy. Align the bit with the tip of the driver. Push it in until you hear a click. The same applies when removing. No one has ever been surprised by this one-hand operation mechanism.

Q. Is there a warranty period?

A. In order to deal with the initial failure, there will be a 3 month product warranty from the return shipping date.

■ Risk & Challenge

Parallel imports may occur. Please note that it may not be possible to prevent depending on individual imports and sales channels.

————–

When you want to use the main body vertically, you can press the vertical operation button at the end with your thumb.

It is very easy to grip and can be used smoothly.

The reason for making MOTION SENSOR X2 is

A subsidiary of a company that makes interior parts for the car manufacturer Volvo.

Volvo ’s reputation for safety has been passed down since ancient times.

Sensory × Easy × Safety = We will deliver a new experience.

Turn your wrist to the right to turn it clockwise.

Twist to the left to automatically switch counterclockwise.

The driver's speed is automatically adjusted according to the tilt angle!

You can control changes from super slow to ultra high speed with just your wrist.

Of course, no power is required! No burden on wrists or fingers.

Since it can be used sensuously, it can be used by women who are not good at tools and elderly people.

Those who do not want to fail with screw tightening are also safe ♪

Possible to use while chargingSo you don't have to worry about the remaining battery power.

“That, it disappeared somewhere again.”

Because the bits are small and there are many types,

There are a lot of troubles such as lost or troublesome.

To replace the MOTION SENSOR X2 bit, just push it in!

It can be easily installed with one hand.

Easy management of all 20 types of bits!

* The number of bits included with the driver is 18.

A set of 20 photos is a bit box set.

Even though it is an electric screwdriver, it takes a long time to work, and the hands are overloaded and tired.

MOTION SENSOR X2Realizes a comfortable fit that fits into the hand with reduced palm stress.

While expressing the profound feeling of the driver body, we pursued practicality that is easy to grip and less fatigued.

A bright LED light is turned on when the switch is turned on.

It is safe to work in a warehouse or in a place with little electricity.

Even if you roll a bit,You can quickly find it by lighting it with a light.

It is also recommended to prepare as an emergency light in case of power failure or disaster.

"Torque over and no further electric tightening …"

“I'd like to close the last round by hand!

At that timeYou can also use it manually.

Torque is 6kg, so screwing on a PC or a little furniture

Of course you can do without problems.

Country of origin: China

■ Driver

Driver body, 18 attached bits, USB cable, English / Chinese manual

18 included bits

■ Driver & bit box set

Driver body, bit box, USB cable, English / Chinese manual (driver), 20 attached bits, English / Chinese manual (bit box)

20 included bits

Our development team is the most professional R & D team that brings together young talents, and has excellent design and design capabilities to meet customer needs in high-precision digital products.

The high precision X2 driver is inspired by aluminum tubes. The mobile technology R & D team has been able to reach this X2 driver in 25 days, after 700 days, in order to make the addictive driver more modern and technical. It was.

All-metal “Innovative Electric Screwdriver with High-Precision Motion Sensor X2” has been completed beyond the strenuous days of design, prototype production, testing and upgrades.

Since our establishment in 2016, we have independently developed over 10 products, and in 2019 we have won 20 patents. Over the past three years, our drivers have gradually advanced into the world and have been recognized by people all over the world.

When I first got this driver and a bit box, I was thrilled and surprised!

Numerous innovative technologies with this small metal body …

A motion sensor that detects even a slight tilt, a stepless speed control that seamlessly connects it to operation, and a rugged yet luxurious design. A bit box that provides tremendous ease of use.

The technology is a big innovation for many people who use electric screwdrivers.

The first surprise is the surprising ease of use of the bit box. There must be many people who had a hard time changing the bits.

But this bit box eliminates this hard work from this world. Just press and lift, you can freely attach and remove. Surely this should become the standard in the future.

This is an innovative and wonderful thing that will benefit many people!

So I started this project.

At the Tokyo Gift Show held at Big Sight in September, several people said, “This is the best of all the exhibited products!” I would like as many people as possible to pick up and feel the excitement of a child with new tools.

Q. Please tell me the weight and size.

A. The driver body is 28mm in diameter x 183mm in length and weighs 500g. The bit box is 98.4 mm long x 121.4 mm wide x 76 mm high.

Q. How many bits are included?

A. 18 types are included with the driver, and 20 types are included with the bit box.

Q. I have never touched the tool, do you know how to use it?

A. No problem at all. It is a next-generation driver made for such people. Although it may be surprised at first because it is an innovative mechanism, it can be used freely by simply pressing the button and tilting it to the right.

Q. When using the driver upright, the buttons on the side are difficult to press.

A. A button is attached to the end to cover such a case. When you use it upright, you can use it easily by holding the button at the end with your thumb.

Q. What is the strength (torque)?

A. It has a strength of 6kg (6kgf.cm). It can be used not only for electronic equipment but also for simple DIY.

Q. Please let me know the charging performance.

A. The charging capacity is 2200mAh and the charging time is 2.5 hours at the maximum.

Q. What should I do if I can't turn it around electrically?

A. Of course, the screw may be too hard to turn. For such times, this driver has a moderate thickness, shape, and weight so that it can be easily used as a manual driver.

Q. What is a motion sensor?

A. The latest technology based on ergonomics, in which the machine moves in response to the movement of the human body. Really just tilt to the right, the bit will start spinning at a very low speed. I'm sure you will be amazed by this accuracy.

Q. Is it really easy to change bitboxes?

A. Very easy. Align the bit with the tip of the driver. Push it in until you hear a click. The same applies when removing. No one has ever been surprised by this one-hand operation mechanism.

Q. Is there a warranty period?

A. In order to deal with the initial failure, there will be a 3 month product warranty from the return shipping date.

■ Risk & Challenge

Parallel imports may occur. Please note that it may not be possible to prevent depending on individual imports and sales channels.

Support this project with GREEN FUNDING





Source link

LEAVE A REPLY

Please enter your comment!
Please enter your name here